 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DATA SHEET PHOTOCOUPLER PS9587,PS9587L1,PS9587L2,PS9587L3 HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN DIP HIGH-SPEED PHOTOCOUPLER -NEPOC FOR CREEPAGE DISTANCE OF 8 mm DESCRIPTION The PS9587, PS9587L1, PS9587L2 and PS9587L3 are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. The PS9587L1 and PS9587L2 are designed specifically for long creepage-distance as well as high common mode transient immunity (CMR) and high speed digital output type. Consequently, they are suitable for high speed logic interface that needs long creepage-distance (8 mm) on mounting. The PS9587L1 is lead bending type for long creepage distance. The PS9587L2 is lead bending type for long creepage distance (Gull-wing) for surface mount. The PS9587L3 is lead bending type (Gull-wing) for surface mounting. Series- FEATURES * Long creepage distance (8 mm MIN.: PS9587L1, PS9587L2) * High common mode transient immunity (CMH, CML = 15 kV/s MIN.) * High isolation voltage (BV = 5 000 Vr.m.s.) * High-speed response (10 Mbps) * Pulse width distortion (tPHL - tPLH = 10 ns TYP.) * Open collector output * Ordering number of tape product: PS9587L2-E3: 1 000 pcs/reel : PS9587L3-E3: 1 000 pcs/reel * Pb-Free product * Safety standards * UL approved: File No. E72422 * CSA approved: No. CA 101391 * BSI approved: No. 8937, 8938 * SEMKO approved: No. 615433 * NEMKO approved: No. P06207243 * DEMKO approved: No. 314091 * FIMKO approved: No. FI 22827 * DIN EN60747-5-2 (VDE0884 Part2) approved (Option) 1 2 3 4 8 PIN CONNECTIONS (Top View) 7 6 5 1. NC 2. Anode 3. Cathode 4. NC 5. GND 6. VO 7. NC 8. VCC APPLICATIONS * FA Network * Measurement equipment * PDP The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. PN10678EJ03V0DS (3rd edition) Date Published August 2008 NS Printed in Japan The mark 2007, 2008 The revised points can be easily searched by copying an " PS9587,PS9587L1,PS9587L2,PS9587L3 PACKAGE DIMENSIONS (UNIT: mm) DIP Type PS9587 9.25 +0.5 -0.25 1.01-0.2 +0.4 7.62 6.5-0.1 +0.5 3.50.2 0.50.15 2.54 0 to 15 Lead Bending Type (Gull-wing) For Surface Mount PS9587L3 9.25-0.25 +0.5 9.650.4 3.50.2 0.50.15 2.54 0.740.25 2 Data Sheet PN10678EJ03V0DS 0.6350.15 1.01 +0.4 -0.2 6.5-0.1 +0.5 PS9587,PS9587L1,PS9587L2,PS9587L3 Lead Bending Type For Long Creepage Distance PS9587L1 9.25 +0.5 -0.25 10.16 1.01 +0.4 -0.2 6.5-0.1 +0.5 3.50.2 0.50.15 2.54 0 to 15 Lead Bending Type For Long Creepage Distance (Gull-wing) For Surface Mount PS9587L2 9.25-0.25 +0.5 11.80.4 1.01 +0.4 -0.2 6.5-0.1 +0.5 3.50.2 0.50.15 2.54 0.90.25 0.250.2 Data Sheet PN10678EJ03V0DS 3 PS9587,PS9587L1,PS9587L2,PS9587L3 FUNCTIONAL DIAGRAM 8 2 6 3 5 Shield LED ON OFF Output L H MARKING EXAMPLE No. 1 pin Mark 9587 N 831 Type Number Assembly Lot N 8 31 Week Assembled Year Assembled (Last 1 Digit) In-house Code (L or T) Rank Code PHOTOCOUPLER CONSTRUCTION Parameter Air Distance (MIN.) Outer Creepage Distance (MIN.) Isolation Distance (MIN.) PS9587, PS9587L3 7 mm 7 mm 0.4 mm PS9587L1, PS9587L2 8 mm 8 mm 0.4 mm 4 Data Sheet PN10678EJ03V0DS PS9587,PS9587L1,PS9587L2,PS9587L3 ORDERING INFORMATION Part Number Order Number Solder Plating Specification PS9587 PS9587L1 PS9587L2 PS9587L3 PS9587L2-E3 PS9587L3-E3 PS9587-V PS9587L1-V PS9587L2-V PS9587L3-V PS9587L2-V-E3 PS9587L3-V-E3 PS9587-AX PS9587L1-AX PS9587L2-AX PS9587L3-AX PS9587L2-E3-AX PS9587L3-E3-AX PS9587-V-AX PS9587L1-V-AX PS9587L2-V-AX PS9587L3-V-AX PS9587L2-V-E3-AX PS9587L3-V-E3-AX Embossed Tape 1 000 pcs/reel Magazine case 50 pcs DIN EN60747-5-2 (VDE0884 Part2) Approved (Option) Embossed Tape 1 000 pcs/reel Pb-Free (Ni/Pd/Au) Magazine case 50 pcs Packing Style Safety Standard Approval Standard products (UL, CSA, BSI, SEMKO, NEMKO, DEMKO, FIMKO approved) Application Part Number* PS9587 PS9587L1 PS9587L2 PS9587L3 PS9587L2 PS9587L3 PS9587 PS9587L1 PS9587L2 PS9587L3 PS9587L2 PS9587L3 1 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10678EJ03V0DS 5 PS9587,PS9587L1,PS9587L2,PS9587L3 ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Diode Forward Current *1 Symbol IF VR VCC VO IO *2 Ratings 30 5 7 7 25 40 5 000 -40 to +85 -55 to +125 Unit mA V V V mA mW Vr.m.s. C C Reverse Voltage Detector Supply Voltage Output Voltage Output Current Power Dissipation PC BV TA Tstg Isolation Voltage *3 Operating Ambient Temperature Storage Temperature *1 Reduced to 0.3 mA/C at TA = 25C or more. *2 Applies to output pin VO (Collector pin). Reduced to 1.5 mW/C at TA = 65C or more. *3 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output. Pins 1-4 shorted together, 5-8 shorted together. RECOMMENDED OPERATING CONDITIONS (TA = 25C) Parameter High Level Input Current Low Level Input Voltage Supply Voltage TTL (RL = 1 k, loads) Pull-up Resistance Symbol IFH VFL VCC N RL 330 MIN. 6.3 0 4.5 5.0 TYP. 10 MAX. 12.0 0.8 5.5 5 4k Unit mA V V 6 Data Sheet PN10678EJ03V0DS PS9587,PS9587L1,PS9587L2,PS9587L3 ELECTRICAL CHARACTERISTICS (TA = -40 to +85C, unless otherwise specified) Parameter Diode Forward Voltage Reverse Current Terminal Capacitance Detector High Level Output Current Low Level Output Voltage High Level Supply Current Low Level Supply Current Coupled Threshold Input Current (H L) *2 Symbol VF IR Ct IOH VOL ICCH ICCL IFHL Conditions IF = 10 mA, TA = 25C VR = 3 V, TA = 25C VF = 0 V, f = 1 MHz, TA = 25C VCC = VO = 5.5 V, VF = 0.8 V VCC = 5.5 V, IF = 5 mA, IOL = 13 mA VCC = 5.5 V, IF = 0 mA, VO = Open VCC = 5.5 V, IF = 10 mA, VO = Open TA = 25C VCC = 5 V, VO = 0.8 V, RL = 350 MIN. 1.4 TYP. *1 MAX. 1.8 10 Unit V 1.65 A pF 30 1 0.2 5 9 150 100 0.6 8 11 3.3 A V mA mA mA 1.5 10 11 5 Isolation Resistance Isolation Capacitance Propagation Delay Time (H L) *3 RI-O CI-O tPHL VI-O = 1 kVDC, RH = 40 to 60%, TA = 25C V = 0 V, f = 1 MHz, TA = 25C VCC = 5 V, TA = 25C 0.9 35 5 75 100 pF ns VTHHL = VTHLH = 1.5 V, tPLH RL = 350 , TA = 25 C 45 Propagation Delay Time (L H) *3 75 100 ns IF = 7.5 mA, CL = 15 pF tr tf tPHL-tPLH 20 10 10 Rise Time Fall Time Pulse Width Distortion (PWD) *3 ns ns 50 ns Propagation Delay Skew Common Mode Transient Immunity at High Level Output *4 tPSK CMH VCC = 5 V, TA = 25C, IF = 0 mA, VO (MIN.) = 2 V, VCM = 1.5 kV, RL = 350 15 60 ns kV/s Common Mode Transient Immunity at Low Level Output *4 CML VCC = 5 V, TA = 25C, IF = 7.5 mA, VO (MAX.) = 0.8 V, VCM = 1.5 kV, RL = 350 15 kV/s Data Sheet PN10678EJ03V0DS 7 PS9587,PS9587L1,PS9587L2,PS9587L3 *1 Typical values at TA = 25C *2 Because VOL of 2 V or more may be output when LED current is input and when output power supply is on and off, confirm the characteristics (operation with the power supply on and off) during design, before using this device. *3 Test circuit for propagation delay time Pulse input (IF) (PW = 1 s, Duty cycle = 1/10) Input (monitor) 47 tPHL tPLH 0.1 F VCC = 5 V Input 50% RL = 350 VO (monitor) CL = 15 pF 0V 5V Output 1.5 V VOL VOH (IF = 7.5 mA) Remark CL includes probe and stray wiring capacitance. *4 Test circuit for common mode transient immunity VCC = 5 V SW IF 0.1 F RL = 350 VO (monitor) CL = 15 pF VCM VO (IF = 0 mA) VO (IF = 7.5 mA) VOH 2V 0.8 V VOL VCM 90% 10% tr tf 1.5 kV 0V Remark CL includes probe and stray wiring capacitance. USAGE CAUTIONS 1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of more than 0.1 F is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high temperature and high humidity. 8 Data Sheet PN10678EJ03V0DS PS9587,PS9587L1,PS9587L2,PS9587L3 TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 40 Detector Power Dissipation PC (mW) Maximum Forward Current IF (mA) 50 DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 40 30 30 20 20 10 10 0 25 50 75 85 100 125 0 25 50 75 85 100 125 Ambient Temperature TA (C) Ambient Temperature TA (C) FORWARD CURRENT vs. FORWARD VOLTAGE 100 High Level Supply Current ICCH (mA) Low Level Supply Current ICCL (mA) 14 SUPPLY CURRENT vs. AMBIENT TEMPERATURE Vcc = 5.5 V 12 10 8 6 4 2 0 -50 ICCH (IF = 0 mA) ICCL (IF = 10 mA) Forward Current IF (mA) 10 TA = +85C +50C +25C 0C -20C -40C 1 0.1 0.01 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 -25 0 25 50 75 100 Forward Voltage VF (V) Ambient Temperature TA (C) OUTPUT VOLTAGE vs. FORWARD CURRENT 6 5 Output Voltage VO (V) 4 3 2 RL = 350 1 1.0 k 4.0 k 1 2 3 4 5 Low Level Output Voltage VOL (V) VCC = 5.0 V 0.6 0.5 0.4 0.3 0.2 0.1 LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE IF = 5.0 mA, VCC = 5.5 V IOL = 16.0 mA 13.0 mA 10.0 mA 6.0 mA 0 0 -50 -25 0 25 50 75 100 Forward Current IF (mA) Ambient Temperature TA (C) Remark The graphs indicate nominal characteristics. Data Sheet PN10678EJ03V0DS 9 PS9587,PS9587L1,PS9587L2,PS9587L3 THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE Threshold Input Current IFHL (mA) VCC = 5.0 V, VO = 0.8 V 4 Propagation Delay Time tPHL, tPLH (ns) 5 RL = 350 1.0 k 3 4.0 k 100 PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE 80 tPLH: RL = 4.0 k tPLH: RL = 350 60 tPLH: RL = 1.0 k 2 40 tPHL: RL = 4.0 k tPHL: RL = 1.0 k tPHL: RL = 350 0 -50 -25 0 25 IF = 7.5 mA, VCC = 5.0 V 50 75 100 1 20 0 -50 -25 0 25 50 75 100 Ambient Temperature TA (C) Ambient Temperature TA (C) PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE 100 Pulse Width Distortion tPHL-tPLH (ns) IF = 7.5 mA, VCC = 5.0 V Switching Time tr, tf (ns) 80 80 100 SWITCHING TIME vs. AMBIENT TEMPERATURE IF = 7.5 mA, VCC = 5.0 V, RL = 350 60 RL = 4.0 k RL = 1.0 k 20 RL = 350 50 75 60 40 40 tr 20 tf 0 -50 -25 0 25 100 0 -50 -25 0 25 50 75 100 Ambient Temperature TA (C) Ambient Temperature TA (C) PROPAGATION DELAY TIME vs. FORWARD CURRENT 120 Propagation Delay Time tPHL, tPLH (ns) VCC = 5.0 V 100 80 60 40 20 0 5 tPLH: RL = 350 tPHL: RL = 350 , 1.0 k, 4.0 k 7.5 10 12.5 15 17.5 20 Pulse Width Distortion tPHL-tPLH (ns) 100 PULSE WIDTH DISTORTION vs. FORWARD CURRENT VCC = 5.0 V 80 tPLH: RL = 4.0 k tPLH: RL = 1.0 k 60 RL = 4.0 k RL = 350 40 20 RL = 1.0 k 0 5 7.5 10 12.5 15 17.5 20 Forward Current IF (mA) Forward Current IF (mA) Remark The graphs indicate nominal characteristics. 10 Data Sheet PN10678EJ03V0DS PS9587,PS9587L1,PS9587L2,PS9587L3 TAPING SPECIFICATIONS (UNIT: mm) Outline and Dimensions (Tape) 2.00.1 4.00.1 1.750.1 1.5 +0.1 -0 4.5 MAX. 11.50.1 24.00.3 12.80.1 2.050.05 12.00.1 10.70.1 4.10.1 0.30.05 Tape Direction PS9587L2-E3 Pull-out direction Outline and Dimensions (Reel) 2.00.5 3302.0 2.00.5 13.00.2 R 1.0 21.00.8 25.51.0 29.51.0 1001.0 Packing: 1 000 pcs/reel 23.9 to 27.4 Outer edge of flange Data Sheet PN10678EJ03V0DS 11 PS9587,PS9587L1,PS9587L2,PS9587L3 Outline and Dimensions (Tape) 2.00.1 4.00.1 1.5 +0.1 -0 1.750.1 5.3 MAX. 16.00.3 7.50.1 10.40.1 1.550.1 12.00.1 10.30.1 4.750.1 0.350.05 Tape Direction PS9587L3-E3 Outline and Dimensions (Reel) 2.00.5 2.00.5 13.00.2 3302.0 21.00.8 1001.0 R 1.0 17.51.0 21.51.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange 12 Data Sheet PN10678EJ03V0DS PS9587,PS9587L1,PS9587L2,PS9587L3 RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) D A Part Number PS9587L2 PS9587L3 Lead Bending lead bending type (Gull-wing) for long creepage distance (surface mount) lead bending type (Gull-wing) for surface mount A 10.2 8.2 B 2.54 2.54 B C 1.7 1.7 C D 2.2 2.2 Data Sheet PN10678EJ03V0DS 13 PS9587,PS9587L1,PS9587L2,PS9587L3 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (C) (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron * Peak Temperature (lead part temperature) * Time (each pins) * Flux 350C or below 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100C 14 Data Sheet PN10678EJ03V0DS PS9587,PS9587L1,PS9587L2,PS9587L3 (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10678EJ03V0DS 15 PS9587,PS9587L1,PS9587L2,PS9587L3 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Application classification (DIN EN 60664-1 VDE0110 Part 1) for rated line voltages 300 Vr.m.s. for rated line voltages 600 Vr.m.s. Climatic test class (DIN EN 60664-1 VDE0110) Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.5 x UIORM, Pd < 5 pC Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 x UIORM, Pd < 5 pC Highest permissible overvoltage Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) Clearance distance Creepage distance Comparative tracking index (DIN IEC 112/VDE 0303 Part 1) Material group (DIN EN 60664-1 VDE0110 Part 1) Storage temperature range Operating temperature range Isolation resistance, minimum value VIO = 500 V dc at TA = 25C VIO = 500 V dc at TA MAX. at least 100C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = Tsi Ris MIN. 10 9 Symbol Speck Unit IV III 55/100/21 UIORM Upr 1 130 1 695 Vpeak Vpeak Upr 2 119 Vpeak UTR 8 000 2 >8.0 >8.0 Vpeak mm mm CTI 175 III a Tstg TA -55 to +125 -40 to +85 C C Ris MIN. Ris MIN. 10 10 12 11 Tsi Isi Psi 175 400 700 C mA mW 16 Data Sheet PN10678EJ03V0DS PS9587,PS9587L1,PS9587L2,PS9587L3 * The information in this document is current as of August, 2008. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1 Data Sheet PN10678EJ03V0DS 17 PS9587,PS9587L1,PS9587L2,PS9587L3 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. |
Price & Availability of PS9587L3-V-AX
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |